Decompression (diving)

File:Tech diving decompression stop.jpg

File:Deck decompression chamber PA197922.jpg

File:Decompression table bsac nitrox.jpg

File:Sicherheitsstop an der Ankerkette.jpg

Decompression (diving) refers to the process that allows divers to safely return to the surface after spending time at depth underwater. This process is necessary to prevent decompression sickness, a potentially life-threatening condition caused by dissolved gases (primarily nitrogen) coming out of solution in the body and forming bubbles in the bloodstream and tissues. Decompression is a critical aspect of scuba diving, commercial diving, and military diving operations, where divers are exposed to increased pressure for prolonged periods.

Overview

When a diver descends, the pressure of the surrounding water increases, and the body absorbs more nitrogen from the breathing gas due to the increased pressure. The deeper and longer the dive, the more nitrogen is absorbed. Upon ascending, the pressure decreases, and the absorbed nitrogen can form bubbles in the body if the ascent is too rapid. Decompression involves ascending at a controlled rate and, if necessary, making stops at certain depths for specific periods to allow the excess nitrogen to be safely released from the body.

Decompression Schemes

There are various decompression schemes used to calculate the necessary decompression stops and times based on the depth and duration of the dive. These include decompression tables and dive computers.

• Decompression Tables: These are pre-calculated charts that provide guidelines for ascent times and decompression stops. The most widely recognized tables were developed by John Haldane in the early 20th century and have been modified and updated by organizations such as the U.S. Navy and the British Sub-Aqua Club.

• Dive Computers: Modern dive computers use sophisticated algorithms to continuously calculate decompression requirements in real-time, adjusting for the actual dive profile. This allows for more precise and often safer decompression strategies.

Decompression Sickness

Decompression sickness (DCS), also known as "the bends," occurs when nitrogen bubbles form in the bloodstream or tissues. Symptoms can range from joint pain and rashes to paralysis and death. Immediate treatment usually involves administering 100% oxygen and recompression in a hyperbaric chamber, which increases pressure to re-dissolve the bubbles and then allows for a controlled decompression.

Prevention

Preventing DCS involves adhering to safe diving practices, including following appropriate decompression procedures, avoiding excessive depths and bottom times, and ensuring proper hydration. Divers are also advised to avoid flying or ascending to high altitudes soon after diving.

Technical and Recreational Decompression Diving

Decompression diving can be divided into technical and recreational categories. Technical decompression diving involves planned decompression stops, often with the use of mixed gases like helium in the breathing mix to reduce nitrogen absorption. Recreational diving typically involves staying within no-decompression limits, but some advanced recreational divers may perform short, controlled decompression stops as a safety measure.

Conclusion

Decompression is a fundamental aspect of diving that requires careful planning and adherence to safety protocols to prevent decompression sickness. As diving technology and understanding of decompression theory have advanced, divers today can explore the underwater world with greater safety and flexibility than ever before.

   This article is a medical stub. You can help WikiMD by expanding it!