Mortar
Mortar is a workable paste used to bind building blocks such as stones, bricks, and concrete masonry units together, fill and seal the irregular gaps between them, and sometimes add decorative colors or patterns in masonry walls. In its broadest sense, mortar includes pitch, asphalt, and soft mud or clay, as used between mud bricks. Mortar comes from Latin mortarium, meaning crushed.
Composition[edit]
The most common binder since the early 20th century is Portland cement but the ancient binder lime mortar is still used in some new construction. Lime and gypsum in the form of plaster of Paris are used particularly in the repair and repointing of buildings and structures because it is much more flexible than cement mortar.
Types[edit]
There are several types of mortar used in construction industry. The selection of type of mortar is dependent on the nature of the structure, the type of masonry unit, the climatic conditions, and the exposure of the structure.
Lime mortar[edit]
Lime mortar is composed of lime and an aggregate such as sand, mixed with water. The Ancient Egyptians were the first to use lime mortars. About 6,000 years ago, they used lime to plaster the pyramids at Giza. In addition, the Egyptians also incorporated various limes into their religious temples as well as their homes.
Cement mortar[edit]
Cement mortar is a mixture of cement, sand and water. It is the most commonly used mortar in construction industry. It is used for all types of masonry work such as brickwork, blockwork, stonework.
Gypsum mortar[edit]
Gypsum mortar, also called plaster of Paris, was used in the construction of the Egyptian pyramids and many other ancient structures. It is made from gypsum, which requires a lower firing temperature. It is therefore easier to make than lime mortar and sets up much faster which may be a reason it was used as the typical mortar in ancient, brick arch and vault construction.
See also[edit]
References[edit]
<references />
Ad. Transform your health with W8MD Weight Loss, Sleep & MedSpa

Tired of being overweight?
Special offer:
Budget GLP-1 weight loss medications
- Semaglutide starting from $29.99/week and up with insurance for visit of $59.99 and up per week self pay.
- Tirzepatide starting from $45.00/week and up (dose dependent) or $69.99/week and up self pay
✔ Same-week appointments, evenings & weekends
Learn more:
- GLP-1 weight loss clinic NYC
- W8MD's NYC medical weight loss
- W8MD Philadelphia GLP-1 shots
- Philadelphia GLP-1 injections
- Affordable GLP-1 shots NYC
|
WikiMD Medical Encyclopedia |
Medical Disclaimer: WikiMD is for informational purposes only and is not a substitute for professional medical advice. Content may be inaccurate or outdated and should not be used for diagnosis or treatment. Always consult your healthcare provider for medical decisions. Verify information with trusted sources such as CDC.gov and NIH.gov. By using this site, you agree that WikiMD is not liable for any outcomes related to its content. See full disclaimer.
Credits:Most images are courtesy of Wikimedia commons, and templates, categories Wikipedia, licensed under CC BY SA or similar.
Translate this page: - East Asian
中文,
日本,
한국어,
South Asian
हिन्दी,
தமிழ்,
తెలుగు,
Urdu,
ಕನ್ನಡ,
Southeast Asian
Indonesian,
Vietnamese,
Thai,
မြန်မာဘာသာ,
বাংলা
European
español,
Deutsch,
français,
Greek,
português do Brasil,
polski,
română,
русский,
Nederlands,
norsk,
svenska,
suomi,
Italian
Middle Eastern & African
عربى,
Turkish,
Persian,
Hebrew,
Afrikaans,
isiZulu,
Kiswahili,
Other
Bulgarian,
Hungarian,
Czech,
Swedish,
മലയാളം,
मराठी,
ਪੰਜਾਬੀ,
ગુજરાતી,
Portuguese,
Ukrainian



